Doming And Dapping Tools

Blocks and punches for shaping metal

Essential Dapping Set. Includes eight dapping tools with matching block,

really all one needs for virtually any job. Cavity sizes are 28, 24, 20, 18, 15, 12, 9 and 6mm with corresponding punches. Block is completely smooth on opposite side for use as a bench block.

Made of hardwood, this block is used to shape metal without marring. Each

depression is 3/4 deep, with a gentle slope to each die. The diameters include, 4 (100mm), 3 (75mm), 3 1/2 (89mm), and 2 1/2 (63mm).

Steel Bench Block 63.5 x 63.5mm. A finely polishedhardened steel block

63.5 x 63.5 x 19mm ( 2 1/2 x 2 1/2 x 3/4 inch) used for flattening or chasing.

Wood Dapping Block with Two Punches. Two hardwood punches and dapping blo

ck for shaping cases or removing dents. Wood will not scratch or mar precious metals. The block features different size depressions on each side and is 2 1/4 (57mm) square.

Wood Forming Block. Made of hardwood and hand sanded to a smooth finish.

Use this block when working with fine or soft metals and marring could be an issue. Four round depressions: 2 ¼, 2 1/8, 1 7/8 and 1 ¾ diameters. Five U channels, two 90 channels, two 45 grooves

Wood Forming Block. Made of hardwood and hand sanded to a smooth finish.

Use this block when working with fine or soft metals and marring could be an issue. Four round depressions: 2 ¼, 2 1/8, 1 7/8 and 1 ¾ diameters. Five U channels, two 90 channels, two 45 grooves

Wooden Five Piece Shaping Set. Made of hardwood for non-marring, each pun

ch is gently domed with a smooth finish. 3 ¾ in length, the diameters include: 2, 1 ½, 1, ¾ and 5/8.

eCommerce Leicesterdesigned and built byImpact Web Solutions