Observatory Domes

Ghatkopar West, Mumbai, Maharashtra

Bresser Venus 767 Parabolic Reflector…

Bresser Junior Dia-70 – Fl-700 Ng Sky…

Bresser Galaxia Dia-114 – FL-900 675x…

Galileo Skyview III – Refracting…

Celestron 7 X 50 Oceana Waterproof…

Celestron 10 x 25 Outland X Binoculars…

Celestron Nature 10×25 Monocular…

Celestron Regal M2 100ED Spotting Scope

Celestron Ultima 80 – 45 Degree Zoom…

Celestron Regal M2 65ED Spotting Scope

Celestron Regal 100 F-ED Spotting Scope

Binocular / Spotting scope Mount &…

Galileo T Ring for Telephotography…

Mini Observatories – Planetariums…

Pier-Tech Tele-Station 2 RollOff Roof…

I agree to thetermsandprivacy policy

Pioneers in the industry, we offer Technical Innovations ProDome 15 Observatory, Technical Innovations Pro Dome – 10 Observatory – Door in B, Technical Innovations Home Dome – 6 Observatory – Tall 45, Technical Innovations Home Dome – 6 Observatory – Short 9 and Technical Innovations PolyDome Explora-Dome Observatory – 10 from India.

Technical Innovations ProDome 15 Observatory

The Technical Innovations Pro Dome PD-15 is a complete fifteen foot diameter fiberglass observatory designed for institutional, or group uses or to meet special observing needs.

It is designed for stand-alone use with additional wall rings and with special locking mechanisms.

The Technical Innovations Pro Dome PD-15 comes with or without a molded semi-door section and includes an electric shutter and electric dome rotation system, with power supply.

Generous 36 wide semi-door entrance which meets requirements for access by disabled persons.

Weather protection assured by overlapping flanges and baffling, not seals that will wear out or deteriorate.

Temperature control is provided by a brilliant white exterior gel coat that normally keeps inside temperature within a few degrees of the shade temperature, so no cool-down period is required before your observing session begins.

The standard PD-15 will meet all but the most stringent code requirements.

Can be installed at ground level on its own foundation, or can be mounted on a roof-top, tower, or other structure.

A dark blue interior helps preserve dark adaptation.

The shutter is an up-and-over, two piece, automatic latching system.

The dome turns on 48 ball-bearing rollers mounted in the 12 high base ring.

The shutters nest on the rear of the dome when opened.

Where needed, minor modifications can be made to meet special requirements.

Note:The Specifications and colors may vary due to recent improvements in design.

Technical Innovations Pro Dome – 10 Observatory – Door in B

The Technical Innovations 10 Pro Dome Observatoryis a complete ten foot diameter fiberglass observatory designed primarily for stand-alone installations.

The PD10 can accommodate Schmidt-Graininess telescopes up to 16 and Newtonian up to 16 diameter.

The Technical Innovations 10 Pro Dome Observatory has added features such as a molded semi-door section to allow full height entrance; additional rollers; and soffit to meet the most extreme wind/snow conditions.

A reverse flange at the top of the base ring covers the roller area and keeps the dome safe from wind.

Temperature control is provided by a brilliant white exterior gel coat that normally keeps inside temperature within a few degrees of the shade temperature, so no cool-down period is required before your observing session begins.

The shutter opening is a generous 36 wide, extending up to zenith and 16 beyond.

By stacking modular wall rings, walls of any height can be assembled to match your telescope and pier height.

Two shutters move up-and-over on the Technical Innovations Pro Dome 10 observatory, automatically disengaging during opening to nest together at the rear of the dome when open.

A dark blue interior helps preserve dark adaptation.

It offers a full height entrance door (using the slot opening as part of the doorway) allowing access without duck-under doors or high walls.

Two integral, automatic latches lock the shutter together for security when closed.

Weather protection is assured by overlapping flanges and baffling, not seals that will wear out or deteriorate.

Three wall rings maximizes the usable space inside the observatory as you have nearly 6 feet clearance right against the wall.

Note:The Specifications and colors may vary due to recent improvements in design.Yes! I am interested

Technical Innovations Home Dome – 6 Observatory – Tall 45

The Technical Innovations PD6 Observatory Dome is designed for a stand-alone installation, most often on a concrete pad or deck.

The dome comes with a 45 high wall with reverse flange, with a built in 19 wide door.

The Technical Innovations PD6 Observatory Dome is 610 high at the zenith on the inside. The outside diameter of the wall is 72 and the 3 mounting flange turns to the inside.

Weather protection assured by overlapping flanges and baffling, not seals that will wear out or deteriorate.

Temperature control is provided by a brilliant white exterior gel coat that normally keeps inside temperature within a few degrees of the shade temperature, so no cool-down period is required before your observing session begins.

A dark blue interior helps preserve dark adaptation.

The dome turns easily on hard rubber, sealed ball-bearing rollers mounted on the base ring portion of the wall.

The two shutters move up-and-over, automatically disengaging during opening to nest together at the rear of the dome when open.

Full height access door for un-hindered entry in the Home position with the shutter open.

Add on space by adding optional computer cubbies.

Its small size allows installation on almost anywhere and is less imposing in communities where neighbors have concerns about their view of your property.

Note:The Specifications and colors may vary due to recent improvements in design.

Technical Innovations Home Dome – 6 Observatory – Short 9

The Technical Innovations HD6 Observatory Dome is a six foot short dome designed for mounting upon an existing structure.

The dome comes with a 9 high Base Ring which contains the rotation system.

The Technical Innovations HD6 Observatory Domemeasures 310 high on the inside and weighs only 110 pounds assembled.

The outside diameter of the Base Ring is 72 and the 3 mounting flange turns to the inside.

Weather protection assured by overlapping flanges and baffling, not seals that will wear out or deteriorate.

Temperature control is provided by a brilliant white exterior gel coat that normally keeps inside temperature within a few degrees of the shade temperature, so no cool-down period is required before your observing session begins.

A dark blue interior helps preserve dark adaptation.

The dome turns easily on hard rubber, sealed ball-bearing rollers mounted on the base ring portion of the wall.

The two shutters move up-and-over, automatically disengaging during opening to nest together at the rear of the dome when open.

The HD-6S is strong but very lightweight and can be mounted on a rectangular skirt for an additional 4 of height.

Its small size allows installation on almost any building or structure and is less imposing in communities where neighbors have concerns about their view of your property.

The Specifications and colors may vary due to recent improvements in design.

Technical Innovations PolyDome Explora-Dome Observatory – 10

The PolyDome Explora-Dome Observatory is an 10 6 Round structure (less floor).

Crafted from low cost, low maintenance UV stabilized polyethylene.

The PolyDome Explora-Dome Observatory comes to you fully assembled and is virtually indestructible.

Includes Click Lock Lower Hatch and Easy Glide Shutter Door.

PolyDome is offering a whole new breed of observatory dome. . . the Explora-Dome! Unlike our competitors in the market today, the Explora-Dome is a truly affordable, virtually indestructible, maintenance free observatory dome. Now you can afford to sit inside a true observatory sheltered from the winds and annoying neighbors porch lights. No more need to haul your equipment out, set it up, and then when you are finished, break it down and haul it back inside.

The Explora-Dome is rotomolded as a one piece unit. It is manufactured of very strong, UV stabilized polyethylene plastic. The observatory features a two door shutter system: the lower shutter door flips outwards, while the upper door glides open and closed. The Explora-Dome has been designed to allow the owner to add modifications and enhancements of their own choosing. Buyers of the dome can choose their own means of rotation and design a building that suits their needs. The difficult task of creating the dome has been done for you. All the Explora-Dome surfaces and doors have a minumum 1/4 thickness and yet it weighs in at a mere 180 pounds.

Polyethylene is extremely durable; it has a higher impact resistance than fiberglass, aluminum and even steel (no more hailstorm worries). Its coefficient of friction is lower than nylon and comparable to Teflon; making it slippery enough for easy cleanup and snow will slide right off the dome. Polyethylene is 100% recyclable so it is environmentally friendly. Best of all, you arent sacrificing quality for price. Fiberglass takes hours and hours of laying up the resins and glass. That is why they cost so much. Explora-Dome is molded and easily duplicated reducing the cost to an affordable level.

The Explora-Dome has lockable door access. Mounting the Explora-Dome on a track will allow greater ease of rotation.

With the Explora-Dome the do-it-yourself observatory dream comes true! The cost is low enough that an observatory is now within reach of many who thought they could never own one. The hard part is completed and you can add just the finishing touches you want. Polydome allows the individual astronomer to choose the features they want, rather than limit them to a particular design. This allows you to be as budget conscious or as extravagant as you desire. Accessories such as Roof Transition Skirts allow mounting the Explora-Dome on a variety of building shapes.

The Specifications and colors may vary due to recent improvements in design.Describe Your Requirement in Detail

I agree to thetermsandprivacy policy

Galileo Telescope MakersNo. 503 A, Prem Kunj, Navroji Lane, Ghatkopar West, Ghatkopar West,

Tell us what youneedReceive sellerdetailsSeal the dealPlease enter Mobile NumberPlease enter your Mobile NumberInvalid Email IDPlease enter your Email IDPlease enter full namePlease enter your nameYour Contact InformationInvalid InputEnter product/service nameRequirement DetailsI agree to thetermsandprivacy policy