Mothers Day Coasters by Taylor Huizenga

Cut Dina Wakley Media board into 4 4 x 4 squares. Paint each coaster with a coast of Dina Wakley Media White Gesso.

Step 2:Size photos to 3 5/8 x 3. Print out photos on cardstock. Cut out photos and seal with ICE Resin® Paper Sealer. Be sure to coat the edges of the paper.

Step 3:Mix ICE Resin® according to ing a paintbrush, coat the backs of the photos with a coat of ICE Resin® and adhere to the media board. Allow to dry.

Step 4:Slowly pour a small amount of ICE Resin® into the center of your coaster. Be sure to not over pour, remember it is easier to add more if needed then it is to remove if youve added to much.

Step 5:Using your stir stick slowly push the resin out to the edges. ICE Resin® is self-doming which allows for it to be worked all the way to the edges and not overflow, as long as the resin is not over poured and there is too much.

Step 6:Repeat with all four coasters. Allow ICE Resin® to dry over night.

ICE Resin® and Cobalt Opals Preserved Feather by Brooke Bock

Antiqued Rune Bezel by The Ice Prince aka John Creighton Peterson

ICE Resin® and Cobalt Opals Vintage Bottles by Brooke Bock

Connect with Ice Resin on Social Media.