Polyurethane Hardwood Floor Coatings

Find parts, products, suppliers, datasheets, and more for:Polyurethane Hardwood Floor CoatingsFloor Coatings – Deco-Coat — DC-2606 Rigid

Description: The Deco-Coat Urethane Doming Series are two component, low viscosity

doming resins. These decorative resin systems are designed for continuous outdoor exposure. They remain crystal clear and resist yellowing.

Features: Protective, Weather / UV Resistant

Description: Wearcoat 3015 has non-yellowing, nonchalking properties combined with high gloss, excellent flexibility abrasion resistance, hardness and good chemical resistance. Technical Data It is especially useful as an industrial/commercial

in areas where solvent vapors would be a

Features: Chemical / Oil Resistant, Protective

Description: WEARCOAT 100 has non-yellowing, nonchalking properties combined with excellent abrasion, chemical, solvent and good heat resistance properties. It provides excellent gloss retention and will continue to retain a high gloss through many years of service.

Features: Chemical / Oil Resistant, Heat Resistant / High Temperature, Protective

Description: One package aromatic urethane sealer for concrete or wood

Features: Chemical / Oil Resistant, Protective, Wear Resistant (Abrasion / Erosion)

Description: Loctite® Fixmaster® Industrial

. High gloss, seamless, hygienic surface. High chemical resistance, extremely hard wearing, and durable. Superior color retention and chaulk resistance. Key Features: Interior/exterior, high solids, polyester

is a high solids, single component, aliphatic, moisture cure urethane, VOC complying, moisture resistant industrial

cures to a high gloss and chemical resistant film equivalent to two-part

, Resin Base / Polymer Binder, Other

Features: Chemical / Oil Resistant, Other

Description: General Polymers CHIP RESISTANT HIGH BUILD HANGAR INDUSTRIAL

that requires an impact resistant, high gloss, easy to maintain finish. This 35 mil system is resistant to staining and chemical attack from certain common acids, alkalies,

, Resin Base / Polymer Binder, Vinyl, Water Based

Features: Chemical / Oil Resistant, Protective, Wear Resistant (Abrasion / Erosion)

Operating / Use Temperature: 50 to 90 F

Description: RECOMMENDED USAGE Used to seal terrazzo, concrete or other

systems where a gloss finish is desired.

, Resin Base / Polymer Binder, Water Based, Other

Features: Chemical / Oil Resistant, Weather / UV Resistant

Description: Loctite® Fixmaster® Industrial

. High gloss, seamless, hygienic surface. High chemical resistance, extremely hard wearing, and durable. Superior color retention and chaulk resistance.

ENAMEL is a heavy duty, two component, exterior/interior, low VOC, high solids, polyester-aliphatic urethane industrial

. Provides a high gloss, excellent chemical resistance, color retention, and chalk resistance. Outstanding

Features: Chemical / Oil Resistant, Heat Resistant / High Temperature, Other

Description: Loctite® Fixmaster® Superior Performance Urethane

, Anti-Slip Additive is an anti-slip additive for Loctite® Fixmaster® Superior Performance Urethane

Description: Acrylic aliphatic urethane, high gloss, two component, gloss retention

Features: Chemical / Oil Resistant, Corrosion Inhibiting / Rust Preventive

Description: oils, stains and water bead rather than soak into material. When applied, these

can keep materials such as fabrics, paper, leather, carpet and uniforms looking new longer. They can also be used in combination with other agents such as starches, paper strengthening agents and fixative

Chemistry: Fluoropolymers (PTFE, FEP, MFA, etc.)

Features: Chemical / Oil Resistant, Waterproof / Water Repellant

Industry: Automotive, Electronics, Food and Beverage, Medical / Healthcare, Other

Description: The Sauereisen Fast-Trak Glaze Series is a

system specifically designed to protect concrete, steel or masonry surfaces in the pulp & paper industry. Fast-Trak has the chemical resistance to withstand bleaches, liquors and other corrosive substances that attack unprotected

Chemistry: Epoxy, Resin Base / Polymer Binder

Features: Chemical / Oil Resistant, Corrosion Inhibiting / Rust Preventive, Protective

Description: Conductive ConoGlaze is an electrically conductive or dissipative, 100% solids epoxy

system. This system offers chemical resistance for use in production, assembly and packaging areas while maintaining electrically conductive properties.

Chemistry: Epoxy, Resin Base / Polymer Binder

Features: Anti-Static / ESD Control, Chemical / Oil Resistant, Conductive, Protective

Description: ConducTop SL No. 1313 is a seamless, self-leveling epoxy monolithic that provides a conductive or dissipative flooring system for concrete, vinyl tile and similar surfaces. ConducTop SL exhibits an extremely durable, high-gloss finish that maintains its electrical properties.

Chemistry: Epoxy, Resin Base / Polymer Binder

Features: Anti-Static / ESD Control, Chemical / Oil Resistant, Conductive

Description: ConoCrete – Chemical & Food Grade No. 115 is a chemically-resistant, 100% solids, aggregate-filled, epoxy

system. It is ideal for resurfacing old and protecting new concrete

from chemical and physical abuse. The physical properties of these materials far exceed those of

Chemistry: Epoxy, Resin Base / Polymer Binder

Features: Chemical / Oil Resistant, Protective, Other

Description: Deco-Coat 2570 Epoxy Resin is an ultra clear, high gloss, durable

. This liquid polymer epoxy resin is formulated without solvents and is therefore safe and easy to use. It is formulated in a convenient 1:1 by volume mix ration.

Chemistry: Epoxy, Resin Base / Polymer Binder

Features: Protective, Weather / UV Resistant

Description: Deco-Coat 2501 Resin is a two component high gloss epoxy resin that forms a hard enamel like finish. This versatile

is a liquid resin that is safe and easy to use. It does no contain any solvents or offensive odors. DC-2501R is also available in low viscosity (DC-2501R LV).

Chemistry: Epoxy, Resin Base / Polymer Binder

Description: -levelling excellent primer less adhesion to many substrates free of tin catalyst Application Multipurpose glue and textile

Chemistry: Resin Base / Polymer Binder, Rubber / Elastomer Based, Silicone

Description: elongation properties acetic acid-curing system self-levelling excellent primerless adhesion to many substrates free of tin catalyst Application Multipurpose glue and textile

Chemistry: Resin Base / Polymer Binder, Rubber / Elastomer Based, Silicone

Description: . Aerosols With a variety of formulations and finishes, an extensive color palette and a familiar package, our exterior aerosol products will help you complete your project.

Sherwin-Williams offers a wide range of

Chemistry: Acrylic / Latex, Alkyd / Oil Based, Resin Base / Polymer Binder

Features: Waterproof / Water Repellant

Substrate / Surface: Concrete / Masonry, Metal, Plastic, Wood

Description: . Aerosols With a variety of formulations and finishes, an extensive color palette and a familiar package, our exterior aerosol products will help you complete your project.

Sherwin-Williams offers a wide range of

Chemistry: Acrylic / Latex, Alkyd / Oil Based, Resin Base / Polymer Binder

Features: Waterproof / Water Repellant

Substrate / Surface: Concrete / Masonry, Metal, Plastic, Wood

Description: Sherwin-Williams is a global provider of protective and marine

, offering a complete line of high performance

technologies to combat corrosion. We deliver unmatched service and

specification support to meet our customers

Chemistry: Epoxy, Fluoropolymers (PTFE, FEP, MFA, etc.), Formaldehyde Resins (Phenolic, Furan, Melamine), Resin Base / Polymer Binder

Features: Heat Resistant / High Temperature, Waterproof / Water Repellant

Industry: Food and Beverage, Marine, Medical / Healthcare, OEM / Industrial, Process Equipment, Railway

Description: With Faux Impressions™, every room is an original. With this line of exceptional products, its never been easier to create unique specialty finishes and achieve results that youll be proud of.

Sherwin-Williams offers a wide range of

Chemistry: Acrylic / Latex, Alkyd / Oil Based, Resin Base / Polymer Binder

Features: Waterproof / Water Repellant

Substrate / Surface: Concrete / Masonry, Metal, Plastic, Wood

Description: Dekguard CP is a single component weather resistant impregnation and glaze, based on acrylic copolymer and siloxane. Dekguard CP combines an unique ability to protect against attacks by water, carbon dioxide (CO2) and other chemicals, with an ability to allow water vapour to escape from the

Description: Seals and mitigates water vapor transmission on concrete

Chemistry: Inorganic (Ceramic, Conversion, Glaze), Other

Features: Waterproof / Water Repellant

has entered into an agreement with Thermoclad Company to create and distribute DuPont™ ABCITE® by Thermoclad. This is a new line of thermoplastic powder

is available to the U.S. and Canadian finishing industry. These thermoplastic powders have been

Chemistry: Resin Base / Polymer Binder, Other

Features: Chemical / Oil Resistant, Dielectric, Weather / UV Resistant

Description: Titebond® 571 Sound & Moisture Control System is a one-part moisture cure urethane

that is designed to be applied directly to on-grade and above-grade concrete and light weight concrete subfloors using a trowel. Titebond 571 is a mold and mildew resistant, self

Substrate / Surface: Concrete / Masonry

Description: This long lasting urethane enhanced static dissipative

finish is the prime defense in ESD environments. With consistent resistance reading of 107-109 Ohms @100 volts, this water based finish is used worldwide to protect electronic devices from damage and to protect

Features: Anti-Static / ESD Control

Substrate / Surface: Ceramic / Porcelain, Plastic

Ralstons MPG Series consoles are designed to provide protection against dust, dirt and oil for items such as: electronic and electrical controls and instrumentation systems. The MPG is suitable for control functions in paper and saw mills, lumberyards, on factoryfloorsas well as in(read more)

Indicates content that may require registration and/or purchase.

Valspar Redefines Sports Flooring With New VOC Compliant, High Performance OMU Sealer And Finish

Valsport WP-4.1 Fast Dry 350 Sanding Sealer New Valsport WP-4.1 is a premium polyurethane sealer that dries in as little as two hours to reduce time between coats , while deeply penetrating into woods for unmatched hardness underfoot. Designed to securely seal bare wood floors and produce an optimum clear surface for finish coats, it is formulated for the extreme demands of heavy-traffic, high-impact sports hardwood floors.

Painting Products Remodeling Paints, Products, Remodeling, Finishes and Surfaces, Doors, Painting, Audiovisual Equipment, Sherwin-Williams

Super Fast-Drying Polyurethane floor finish dries 25% faster, allowing contractors to complete top- coating jobs in one day, the maker says. Formulated for interior hardwood floors, this oil-based finish comes in clear satin, clear semi-gloss, and

Popular Products In Vacuums – Big Bruin

Bona Swedish Formula Hardwood Floor Cleaner Is Specifically Formulated For Cleaning All Types Of Wood Floors Coated With A Clear Unwaxed Finish. Including All Polyurethane Finished Floors.

Green Chemistry Discovery Could Lead to Safer Plastics » American Scientist

If youve ever skipped across a hardwood floor , taken shelter in a building insulated with spray foam, or been treated in a hospital, chances are good youve come into contact with polyurethane . The large class of plastics has many uses, especially in coatings and foams, and it can be

If youve ever skipped across a hardwood floor , taken shelter in a building insulated with spray foam, or been treated in a hospital, chances are good youve come into contact with polyurethane . The large class of plastics has many uses, especially in coatings and foams, and it can be

CR4 – Thread: Duct Tape Adhesive Remover for Antique Hardwoods

Re: Duct Tape Adhesive Remover for Antique Hardwoods Before you use any strong cleaners, especially solvents, on the floor , you should determine if your PU coating is an Oil Modified (oil based) polyurethane , or a moisture cured polyurethane.

© Copyright 2018 IEEE GlobalSpec – All rights reserved. Use of this website signifies your agreement to theIEEE Terms and Conditions.

HomeSite MapContactEmployment OpportunitiesPrivacy Policy