Resin and Pressed Flowers Bubble Trouble

In this blog I will present commented discussions on the advantages and disadvantages of various art resins; discuss how to prepare flowers for use with resin and which flowers have worked best/not worked for me. I will be presenting interviews and discussions with other pressed flower and resin artists. I will have a tip of the day section.

Im hoping that lots of you contribute; comments, arguments and disagreements are always welcome. Resin is such a complex medium that we all have something to learn. Besides, tweaks and even new resin products are coming out all the time.

Hi, thank all of you for the great response for my first two blogs. I am greatly encouraged! Sometimes I feel like I am a tiny invisible mite in a huge sea of resin workers, bloggers, and, especially, jewelry sellers.

One of the biggest difficulties I have in working with resin and flowers is with the resin molds, which I call reverse molds, because the face of the piece is at the bottom of the mold. (I get my molds at Michaels, or online at Resin Obsession or other craft sites.)

After I spray the mold with mold release (available wherever the molds are sold–ooh, sorry, it rhymes!), I set the mold upside down on a newspaper to dry, at least a couple of hours; then I respray it and again let it dry. Im finding that spraying it twice results in very shiny pieces.) Then I set the flower face down in the mold; pour in enough resin to just cover the flower and then press gently on the flower with a sponge makeup stick to press the air bubbles out. The problem comes either with obstinate bubbles as in the piece above, or in very delicate flowers which bruise:

so if I push on them the petals either show darkened, or eaten out. Sometimes the flower is full enough that I can moisten it first with resin or pull it into the resin with plastic flat tweezers, thereby avoiding the bubbles, but most flowers tear or fold if I try that.

Basically, its come down to patience: small taps or pushing gently on the flowers to walk the bubbles out to the side and avoiding using the most bruisable flowers in the reverse molds.

Now just a small mention about the bubbles you get on the surface: these are pretty easily taken care of by gently blowing on them with a straw; or passing a heat gun over them, or in the case of more obstinate resins that really dont want to let go of those bubbles, Ive used a little butane torch to pass the flame over. Since I mostly use Colores Doming Resin or Colores general resin, I can get the surface bubbles off with a straw.

Thank you again for your encouragement! Next blog Ill show you a few pieces by other resin-flower artists which I absolutely love. Also, Ill discuss the few of the tools I find absolutely essential in working with resin. Chris

Labels:bruises on flowersbubblescolorespressed flowerspressespressing flowersresinstools

Chris, I have a few questions. Can you use Envirotex Lite in molds? I have only used it to coat flowers that I have laminated and cut out. It works great for that, but dont know about molds, as it would require a deeper layer. Also, I have some molds that are made out of a rigid white plastic. They look very similar to the resin molds on Dick Blick website. I have to get some mold release, then I think I will give this a try. Lynn

Hi, yes, Ive used Envirotex Lite a lot in molds. Not sure about the rigid plastic molds, I was never able to get things out of molds that werent pushable even after putting 2 or 3 sprays of mold release in before filling the trays. The resin molds on Dick Blick are pushable and twistable so if you wait at least 24 hours and the resin is REALLY dry and hard, they pop out when pushed from below. Hope this helps, Chris

Gorgeous pendants! Thanks to reading your lovely blog, I am getting more and more convinced by the second to try using resin myself.

Nice stuff dear. I like itPrincess diamond ringsSapphire pendants

I love flowers, old photos,sewing scuba diving. I am a wife, mom, ICU nurse, and avid crafter. I sell pressed flower jewelry on Etsy and ArtFire.I also have a shop LacyPants on Etsy for custom lacy, feminine panties for all sizes. My other blog is Antique Family Photos (

Tools I Use with Resin; and a wonderful Pressed F…

Watermark theme. Powered byBlogger.