Tag Archives: uv doming resin

UV Resin for Doming Solar Activated Res Hard Type Ultraviolet Cu

Flowers, Leaves, Trees, Plants & Nature

Fimo Canes / Slices (Fruits & Foods)

Christmas, Birthday & Valentines Day

Ribbons Twist Ties, Strings & Twines

Flowers, Leaves, Trees, Plants & Nature

Fimo Canes / Slices (Fruits & Foods)

Christmas, Birthday & Valentines Day

Ribbons Twist Ties, Strings & Twines

American Flag Charms in Star Shaped (5pcs) (20mm x 23mm / Tibetan Silver) USA Flag Pendant Bracelet Earrings Zipper Pulls Keychain CHM460

Fake Star Topping / Star Glitter / Star Sprinkle / Star Confetti / Star Sequin / Micro Star (AB Cream Beige / 3mm / 3g) Resin Jewelry SPK41

Holographic Confetti Assorted Iridescent Sprinkles Glittery Nail Art Flakes Resin Craft Supplies Bling Bling Nail Designs (White / 14pcs)

MiniatureSweet Kawaii Resin Crafts Decoden Cabochons Supplies Jewelry Making

UV Resin for Doming Solar Activated Resin Hard Type Ultraviolet Cure Resin Sunlight Cured Resin Kawaii Resin Supplies (60g / Transparent Clear / Thick Type)

UV Resin for Doming Solar Activated Resin Hard Type Ultraviolet Cure Resin Sunlight Cured Resin Kawaii Resin Supplies (60g / Transparent Clear / Thick Type)

UV Resin for Doming Solar Activated Resin Hard Type Ultraviolet Cure Resin Sunlight Cured Resin Kawaii Resin Supplies (60g / Transparent Clear / Thick Type)

UV resin is a resin that get cured under ultraviolet (UV) or direct sunlight. This is a very hot product for resin crafts in Japan currently. Excellent for open back bezels, bezel setting, small silicone molds, coating for shrink plastic paper, etc.

We have 2 types of clear UV resin: Thin and Thick. This one is bit thicker which is good for cabochon, resin pieces doming.

– Cured hard within minutes, no more waiting

– Cured with UV / sunlight, no mixing like AB resin

– Comes with small tip, simply open and squeeze

– Made with non-toxic materials imported from Japan

-UV Torch / UV Lamp: 1-6 minutes, the strongest the UV light, the shorter the curing time.

-Direct Sunlight (Sunny Day): 10-15 minutes

-Direct Sunlight (Cloudy Day): 30-60 minutes

Copyright © 2018 MiniatureSweet. All Rights Reserved

Product successfully added toyour Shopping Cart

Rigid UV glue low-power hard craft UV curing resin from Japan DIY hardeng adhesive liquiforndmaddecorationabelover

By continuing to use AliExpress you accept our use of cookies (view more on our Privacy Policy). You can adjust your Cookie Preferences at the bottom of this page.

Detailed Seller Ratings information is unavailable when therere less than 10 ratings.

Please select the country you want to ship from

Sorry, the current product is sold out.

Depends on the product properties you select

This product cant be shipped to the selected region.

Returns accepted if product not as described, buyer pays return shipping fee; or keep the product & agree refund with seller.View details

Full refund if product isnt received in

15cm x 15cm x 15cm (5.91in x 5.91in x 5.91in)

Calculate your shipping cost by country/region and quantity.

15cm x 15cm x 15cm (5.91in x 5.91in x 5.91in)

We support the following payment methods.

Customer ServiceDisputes & ReportsBuyer ProtectionNew User GuideReport IPR infringement

RussianPortugueseSpanishFrenchGermanItalianDutchTurkishJapaneseKoreanThaiVietnameseArabicHebrewPolish

All PopularProductPromotionLow PriceGreat ValueReviews

Alibaba Group WebsiteAliExpressAlimamaAlipayFliggyAlibaba CloudAlibaba InternationalAliTelecomDingTalkJuhuasuanTaobao MarketplaceTmallXiamiAliOS1688

UV doming resin with sparklg and crystal-clear smoothurface

Xiamen Aibeisen Electronic Co., Ltd.

The supplier supports Trade Assurance A free service that protects your orders from payment to delivery.

Xiamen Aibeisen Electronic Co., Ltd.

UV doming resin with sparkling and crystal-clear smooth surface

30mL/black tube 50mL, 250mL, 2L/black bottle.

2) Excellent flexibility and elasticity.

3) with sparkling and crystal-clear smooth surface.

UV doming resin with sparkling and crystal-clear smooth surface

UV350 is one component, transparent water clear liquid, middle viscosity, excellent flowability, no solvent and no volatiles. It cured at 365nm (main wavelength) with sparkling and crystal-clear smooth surface. After cured, it is clear and flexible. It widely used in the doming / water proof coating for labels, stickers, metals, glasses,jewels, accessories and so on.

2) Excellent flexibility and elasticity.

3) Solvent-free, all the raw materials are environmental.

6) Fast cured, one component, easy to use.

Cured condition (second)(1000W/365nm)

(1) This product belongs to photosensitive adhesive, so it should be store avoid the light.

(2) Put on safeguard procedures before operation, such as: work clothes, glove and eyes protector.

(3) Clean the sealed and bonded products before operation.

(4) Suggest try a small amount before mass production, because different environment, users and application surface will have different influence.

conducted via . If you require further details regarding the transaction data, please contact the supplier directly.

The supplier supports Trade Assurance A free service that protects your orders from payment to delivery.

Product Listing PolicyIntellectual Property ProtectionPrivacy PolicyTerms of UseLaw Enforcement Compliance Guide

Skok Machine Tools Your Machine Tools Partr South Africa and beyond

The more promotions gifts areSilicone Wristbands USSilicone Bracelets UKcustom bracelets

Epoxies

Our adhesives, potting compounds, and coatings are widely used in the electronic, electrical, construction, and decorative industries.

Epoxies Category:All ProductsAll ManufacturersAdhesives

Potting & Encapsulating Compounds

Electrically Conductive Resins

Clear Doming ResinsLinks:Global Sites:AustraliaCanadaChinaEnglandFinlandIndiaMalaysiaMexicoSwedenThailandU.S.AVietnam

All Right Reserved ® 2011-2017Ellsworth Adhesives Australia PTY Limited

Solarez Fly-Tie UV Resin 3 Pack

All three of our Solarez fly-tie UV resins. Each comes in a 5 gram tube (1/10 oz) with applicator tip – ample for many lures.

– Super-hard scratch resistant finish

– Ideal for thin coats on fishing lure heads

– Thin formula, easy to coat or saturate

– Hard, very viscous for making thick coatings or spheres – bodies, heads, eyes

– Build fly fishing heads and bodies

– Viscous formula, easier to work with

– Flexible finish for swimmers, flex parts – could be used as a wader repair

– Great for coating knots for strength

– Viscous formula, easier to work with

All three instantly cure with a hard finish with sunlight or UV light.

Apply all UV curable products in full shade or indoors, flash withSolarez UV Flashlight for 30 secs, continue working on fly. Tocompletely cure resin, expose to sunlight or use flashlight for about 3 minutes.

Join our new Fly-Tie Group on Facebookhere.

We promise to never spam you, and just use your email address to identify you as a valid customer.

Posted byCarl Deckeron 16th May 2018

This small three pack of Solarez UV resins is an excellent opportunity to gain experience with these particular resins. Small amounts, but enough for a fair number of fishing flies and other uses. Excellent curing properties with the high intensity, Solarez light.

Works great best product I used so far

Posted byLimpingSkunkon 10th Feb 2017

The thin and thick are great for fly tying and for forming loops in fly lines. Havent used the flex yet.

Very good product – We will have to see how it holds up

Posted byJuan Carloson 10th Oct 2016

Ive never used this before and im i love with it, great for surf candies and all kinds of flies, beautiful stuff.

Posted byJerry Fowleson 13th Jul 2016

I am using mine for fly tying. I have used the thin and the thick. Works great. Have not used the flex as yet. One thing to watch. This company is at sea level. I am in Utah and one of the tubes volunteered to unload some of its contents when I opened it. This happens with a lot of stuff from sea level and ends up at 5 or 6000 feet. Bags of chips look like they are going to explode. This by no means is in any way a negative against this product. The good thing is with this stuff is it doesnt harden until exposed to uv lite. The great thing about this choice is I get to see how the different types work for me. Will order larger amounts when I see which one works the best for me.

great product! I had no experience with UV Epoxy or LED Lights and I am very happy with the ease and convenience of the SOLAREZ Products! I will be a repeat customer. Thank you!

Posted byJeffrey DeMarieon 7th Sep 2015

The Thick and Thin resins flow nicely and are easily spread with a bodkin. The Flex just seems to pour out uncontrolled. A little wipe of the tube opening help to keep it from getting everywhere. I have used the Flex on Tellico Nymphs and the other two on Pheasant Tails in all sizes. UV resin is the antidote to epoxy. The best price I have found for UV resin anywhere on the web. Loon and Clear Cure Goo and very overpriced.

Flex Finish Doming ResinA clear, non yellowing, flexible resin for putting a

SUP Pro Repair Kit contains: ZEROVOC styrofoam-safe UV-Cure fiberfil

Thick, Hard GLOW IN THE DARK Formula – Glows in the dark for enhanced night

Hightech Industrial Adhesives and Medical Grade Adhiv

Chinese

Encapsulation of Electronic Components

Adhesives with Electrical Conductivity

Adhesives with Thermal Conductivity

Die Attach: Electrically Conductive Adhesives

Bonding Connecting Elements and Catheters

Encapsulation of Plastic Components

Bonding Plastic Enclosures and Moulded Parts

Cyanoacrylate Adhesives (Superglue)

Hightech Industrial Adhesives and Medical Grade Adhesives

Panacol is a leading international manufacturer of industrial adhesives as well as medical grade adhesives. We provide an extensive product range that includes UV adhesives, structural adhesives and conductive adhesives for a great variety of applications. As a member of Hoenle Group and as a partner of UV equipment manufacturer Hoenle, innovative UV- and UV-LED curing systems are also available from Panacol.Member of Hnle Group

Panacol has developed a new potting compound with medium viscosity and small filler particle size: Structalit® 5894-1 is the perfect choice for large-volume potting or glob top sealing of power electronics. read more

Panacol has developed a new epoxy-based underfiller. Structalit® 8202 is a low viscosity one-part adhesive with a high capillary flow filling the narrowest gaps. read more

Panacol has developed an extremely flexible adhesive, which adheres particularly well to hard to bond plastics including PEEK: Vitralit® UV 4802 is a one-component acrylic system that cures very fast when exposed to light. read more

Subscribe to our newsletter

UV systems, UV lamps, IR/hot air systems, sun simulation equipment, UV measurement technology and adhesives: The Hönle Group offers a unique range of products which enables us to offer a complete solution for our customers specific processes.

Benefit from more than 30 years of experience in the development of industrial UV technology and UV systems.

October 8-11, 2018, Stuttgart/Germany

UV Curable Dome and DecorativCoatings fromymax

Our Quality and Environmental Policies

Optics, Fibre Optics Electro-Optics Adhesives

Dispensing Syringes, Barrels and Cartridges

Positive Displacement Valves and Pumps

Pressure Pots, Reservoirs and Bulk Dispensing

THINKY Mixing and Degassing Machines

Cleaning Surface Preparation

Electronics PCB Manufacture Repair

HomeCoatingsDecorative and Dome CoatingsUV Curable Dome and Decorative Coatings from Dymax

UV Curable Dome and Decorative Coatings from Dymax

Dymax UV Curable Dome Coatingscure crystal clear in seconds upon exposure to ultraviolet light. The instant, on demand light cure locks out airborne contamination. The thicker grades have been optimised for creating a dome which helps clarify and magnify images. The coatings are all one part so no mixing is required and viscosity and flow are consistent, which allows for fewer rejects.

Fast cure times of light cure doming resins mean greater productivity and less inventory. Light cure allows for the elimination of ovens, which will save manufacturing space while recovering high energy costs. UV curable dome coating and decorative coatings are solvent free and do not contain toxic mercury or isocyanates.

Avoid resin running over the edge of the label or object

1) Resin is deposited at the center of the label or object and flows towards the edges. Sharp edges tend to repel overflow. Irregular edges encourage overflow. Thick label stock tends to maintain its edge and minimise overflow.

2) Label backing can minimise or encourage overflow. If the backing material wets more readily than the label surface, it tends to draw the coating over. Using a backing that repels the resin encourages it to remain on the label.

3) Use anX-Y dispenserto dispense a pattern instead of a single drop on non-circular objects. Pattern dispensing lets the resin flow to all the edges at the same time rather than all running to one edge where it can flow over before reaching the remaining edges.

4) Level the dispenser, transfer and curing stations.

1) Purchase products in air free packages (syringes or cartridges).

2) Dispense directly from the shipping container. If resin must be transferred from one container to another, then transfer the container at the end of the last shift.

3) Use low pressure dispensing. Since pressure drops can pull air into the dispensing line, dispense with the lowest pressure possible.

4) Use the shortest possible lines between the container and the dispensing needle.

5) Pass the uncured (liquid) coating underneath a natural gas flame to burst surface bubbles.

6) Process by continuous dispensing and purge tip when restarting line. Whenever fluid flow stops completely, the resin may retract. When resin retracts it can pull air into the line or dispensing tip. The air can create bubbles before it is purged from the line.

1) Some thermoplastics curl or warp when hot. Use a thermoplastic with a higher melting point or reinforcement to solve this problem. Using a thicker substrate may also eliminate warpage.

2) To eliminate curl when doming on thin polyester labels try pre-curing with a black light. The black light should have a maximum intensity at 365 nm. Regular purple colored bulbs or germicidal bulbs will not work. The pre-curing polymerises the coating below the coatings surface. A second lamp is then used to cure the surface to a scratch resistant state. As the label gets larger, softer resins are necessary to prevent warpage.

3) Use of thicker polyester stock to stiffer backing sheets minimizes curl of domed decals.

The UV curing lamp used affects appearance and feel of a coating. Although the highest power lamp will cure the coating fastest and produce the smoothest, slickest surface, it may also warp, yellow or melt the object being coated (and it will cost the most). It is always best to test an application with several light sources. Lifetime tests sometimes favor one lamp system over another.

Small decals or badges (up to .25 .5)

Clear, rigid dome coating that cures in seconds upon exposure to UV light. The coating is high viscosity, allowing for very high dome profiles which help magnify images. Designed to adhere to polyester labels, decals and plastics.

Medium decals or badges (up to 1 3)

Clear, flexible dome coating that cures in seconds upon exposure to UV light. The coating has a medium/high dome profile. Designed to adhere labels and is best suited for coating decals less than 4 cm long.

Crystal clear, rigid dome coating that cures in seconds upon exposure to UV light. The coating has a high gloss finish and excellent adhesion to metal, glass and many plastics. Designed for doming.

Clear, decorative coating that cures in seconds upon exposure to UV and/or visible. The coating has a low viscosity for a thin coating applications and resists many solvents. Has good adhesion to plastics, metal, glass and decals.

Dymax UV Curable Dome & Decorative Coatings Selector Guide

Opti-tec 4200 Optically Clear Polyurethane Encapsulant Potting Compound

Opti-tec 4200 is a clear, water-white polyurethane resin designed for the potting or encapsulation of electronics, LEDs, electrical products and other items where high transparency and aesthetics are important.

Dymax Light Cap® LED Encapsulants and LED Potting Materials

Dymax Light Cap LED Encapsulants and Potting Materials cure in seconds to provide optimal protection for LEDs. Light Cap encapsulation and potting compounds are designed to endure high operating temperatures, resist yellowing and transmit more light than competing technologies.

Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.

Cleaning Surface Preparation

Electronics PCB Manufacture Repair

Copyright © 2018 INTERTRONICS. All rights reserved.

Website design byElectric Studio – Digital WordPress Agency Oxford

UV doming resin with sparklg and crystal-clear smoothurface

Xiamen Aibeisen Electronic Co., Ltd.

The supplier supports Trade Assurance A free service that protects your orders from payment to delivery.

Xiamen Aibeisen Electronic Co., Ltd.

UV doming resin with sparkling and crystal-clear smooth surface

30mL/black tube 50mL, 250mL, 2L/black bottle.

2) Excellent flexibility and elasticity.

3) with sparkling and crystal-clear smooth surface.

UV doming resin with sparkling and crystal-clear smooth surface

UV350 is one component, transparent water clear liquid, middle viscosity, excellent flowability, no solvent and no volatiles. It cured at 365nm (main wavelength) with sparkling and crystal-clear smooth surface. After cured, it is clear and flexible. It widely used in the doming / water proof coating for labels, stickers, metals, glasses,jewels, accessories and so on.

2) Excellent flexibility and elasticity.

3) Solvent-free, all the raw materials are environmental.

6) Fast cured, one component, easy to use.

Cured condition (second)(1000W/365nm)

(1) This product belongs to photosensitive adhesive, so it should be store avoid the light.

(2) Put on safeguard procedures before operation, such as: work clothes, glove and eyes protector.

(3) Clean the sealed and bonded products before operation.

(4) Suggest try a small amount before mass production, because different environment, users and application surface will have different influence.

Transaction History of the Supplier

conducted via . If you require further details regarding the transaction data, please contact the supplier directly.

The supplier supports Trade Assurance A free service that protects your orders from payment to delivery.

Alibaba.com Site:InternationalEspañolPortugusDeutschFrançaisItalianoहिंदीP한국어اللغة العربيةภาษาไทยTrkNederlandstiếng ViệtIndonesianעברית

Product Listing PolicyIntellectual Property ProtectionPrivacy PolicyTerms of UseLaw Enforcement Compliance Guide

25gNew packing hard UV doming res craft adhesive for dry flower quick-dryDIY by low pe9uv lamp stead epoxab glue

By continuing to use AliExpress you accept our use of cookies (view more on our Privacy Policy). You can adjust your Cookie Preferences at the bottom of this page.

Detailed Seller Ratings information is unavailable when therere less than 10 ratings.

Please select the country you want to ship from

Sorry, the current product is sold out.

Depends on the product properties you select

This product cant be shipped to the selected region.

Returns accepted if product not as described, buyer pays return shipping fee; or keep the product & agree refund with seller.View details

Full refund if product isnt received in

20cm x 10cm x 10cm (7.87in x 3.94in x 3.94in)

Calculate your shipping cost by country/region and quantity.

20cm x 10cm x 10cm (7.87in x 3.94in x 3.94in)

We support the following payment methods.

Customer ServiceDisputes & ReportsBuyer ProtectionNew User GuideReport IPR infringement

RussianPortugueseSpanishFrenchGermanItalianDutchTurkishJapaneseKoreanThaiVietnameseArabicHebrewPolish

All PopularProductPromotionLow PriceGreat ValueReviews

Alibaba Group WebsiteAliExpressAlimamaAlipayFliggyAlibaba CloudAlibaba InternationalAliTelecomDingTalkJuhuasuanTaobao MarketplaceTmallXiamiAliOS1688

BHA Blackhead Power Liquid

Earn even more points plus 20% off your next purchase

Earn even more points plus 20% off your next purchase

Blackheads be gone! COSRX BHA Blackhead Power Liquid reduces blackheads and excess sebum while hydrating skin. Formulated with betaine salicylate to fight acne-causing bacteria, this lightweight anti-acne serum eliminates and prevents stubborn pore blockages. Made with a base of white willow bark water, this highly effective treatment leaves skin clear, bright, and blackhead-free.

After cleansing and toning, dispense 1 to 2 pumps onto fingertips and apply it to the areas of the face where blackheads occur.

Salix Alba (Willow) Bark Water, Butylene Glycol, Betaine Salicylate, Niacinamide, 1,2-Hexanediol, Arginine, Panthenol, Sodium Hyaluronate, Xanthan Gum, Ethyl Hexanediol.

Blackheads be gone! COSRX BHA Blackhead Power Liquid reduces blackheads and excess sebum while hydrating skin. Formulated with betaine salicylate to fight acne-causing bacteria, this lightweight anti-acne serum eliminates and prevents stubborn pore blockages. Made with a base of white willow bark water, this highly effective treatment leaves skin clear, bright, and blackhead-free.

After cleansing and toning, dispense 1 to 2 pumps onto fingertips and apply it to the areas of the face where blackheads occur.

Salix Alba (Willow) Bark Water, Butylene Glycol, Betaine Salicylate, Niacinamide, 1,2-Hexanediol, Arginine, Panthenol, Sodium Hyaluronate, Xanthan Gum, Ethyl Hexanediol.

Excluded from coupons : This item is not eligible for coupon discounts.

of respondents would recommend this to a friend.

(0 of 3customers found this review helpful)

Comments aboutCOSRXBHA Blackhead Power Liquid:

This was so awful. The packaging was horrible, it leaked everywhere, and it caused me to have the worst outbreak of blackheads in my entire life. I also got a lot of new pimple while using this. After stopping the product my skin definitely thanked me. BE CAREFUL with this one.

Bottom LineNo, I would not recommend this to a friend

(0 of 3customers found this review helpful)

(2 of 3customers found this review helpful)

Comments aboutCOSRXBHA Blackhead Power Liquid:

Tried this out since I have really bad blackheads on my nose area. Wanted to make it work but I didnt notice any improvements after several uses. Ended up returning it.

(2 of 3customers found this review helpful)

(1 of 4customers found this review helpful)

Comments aboutCOSRXBHA Blackhead Power Liquid:

This actually made my blackheads worse and made my skin break out in texture bumps when I continued to use it. Would not recommend for anyone with sensitive to normal skin!!

(1 of 4customers found this review helpful)

(8 of 8customers found this review helpful)

Finally found something for my enlarged pores

Comments aboutCOSRXBHA Blackhead Power Liquid:

I had been on the fence fooorreeevvveer about buying this product, based on mixed reviews I had seen across various platforms. I have been using for a month now and I absolutely see results.

The thing is, you have to incorporate it into EVERYDAY use to actually see results. I have blackheads occasionally due to my pores around my cheek and nose, but I havent had any lately. My pores are smaller when I dont find myself too lazy to do my nightly routine.

Additionally, if you are using a Vitamin C serum DO NOT use this product with it. The AHA in this cancels out the vitamin C serum. So, if you want to use both (like I do) then use your Vitamin C serum in the morning and this at night, or vice versa.

(8 of 8customers found this review helpful)

(2 of 2customers found this review helpful)

Comments aboutCOSRXBHA Blackhead Power Liquid:

I was really hoping this product would work for me. I broke out the first use but continued to use it. I dont see any difference in my pores or blackheads. Disappointed

Bottom LineNo, I would not recommend this to a friend

(2 of 2customers found this review helpful)

(1 of 1customers found this review helpful)

Comments aboutCOSRXBHA Blackhead Power Liquid:

So glad I added this to my skin care routine. I use this every other night and it has helped a lot with breakouts and blackheads. Ive noticed a huge improvement in my skin. My pores are smaller and the blackheads on my nose are going away. I was worried This liquid would cause my skin to dry out, but it hasnt. I have applied moisturizer after this has fully absorbed into my skin, but only a couple of times. Ive applied it a lot of times without moisturizer and my skin was still soft and smooth after. However, I dont usually have dry skin. If you have dry skin, Id use this in combination with a moisturizer. Wait 20-30 minutes for the liquid to fully absorb, then apply moisturizer. I definitely recommend this product to anyone dealing with blackheads, whiteheads, and large pores.

Bottom LineYes, I would recommend this to a friend

(1 of 1customers found this review helpful)

(1 of 1customers found this review helpful)

Comments aboutCOSRXBHA Blackhead Power Liquid:

Im 21 and never really struggled with acne until the beginning of this year. Ive always had blackheads, but typically only rarely had inflamed pimples. Ive been using this for 2 days and I had at least 6 inflamed pimples on my forehead… and theyre gone. No dry spot. No scar. Gone. My blackheads have made a major improvement, too. This really was a miracle worker for my skin.

(1 of 1customers found this review helpful)

(3 of 3customers found this review helpful)

Comments aboutCOSRXBHA Blackhead Power Liquid:

Absolutely love this whole line, but this product helped my oily combo skin w under the skin bumps and blackheads. Better than the DE tlc. I hope ulta starts carrying even more Kbeauty.

(3 of 3customers found this review helpful)

(2 of 3customers found this review helpful)

This product Contributed to Cearer Skin

Comments aboutCOSRXBHA Blackhead Power Liquid:

I always had 1 or 2 zits on my face and they were large and inflamed. I started a Korean skincare routine. Through checking all ingredients of skincare or makeup products I put on my face and a little less than a year my skin is clear for a couple of weeks at a time. The comedones I get now are not as inflamed and smaller now. My pores are so much smaller also.

Bottom LineYes, I would recommend this to a friend

(2 of 3customers found this review helpful)

(3 of 4customers found this review helpful)

Comments aboutCOSRXBHA Blackhead Power Liquid:

I love this product and after 2 weeks, it has become a HOLY Grail product for me. I use it at night after cleaning my face and wait 20 minutes before applying the rest of my routine. It does cause you to break out more at first because it brings all the gunk to the surface but after a few weeks, your skin becomes so smooth and clear. I use daily but I would recommend slowly easing into that so it doesnt aggravate your skin.

Bottom LineYes, I would recommend this to a friend

(3 of 4customers found this review helpful)

credit cardLearn more & applyManage AccountShip To

Earn even more points plus 20% off your next purchase